Get the best 888 Poker bonus.

       Temacoat GPL-S MIO


DESCRIPTION       Finncoatings®color on the highest level        
A two component, polyamide cured epoxy paint pigmented with micaceous iron oxide.

PRODUCT FEATURES       Finncoatings®color on the highest level
Used as an intermediate or finishing coat in epoxy and polyurethane systems exposed to severe weathering and splashes.

RECOMMENDED USES     
Recommended for bridges, exteriors of tanks, steel frameworks, conveyors, tubular bridges and other steel structures and equipment.Features Forms a very strong and durable coat due to the micaceous iron oxide pigment. Rapidly recoatable. Can be overcoated after prolonged period.

Colour Range               
Grey. Finncoatings®color on the highest level

Gloss groups                
Matt

Recommended film thicknesses

Theoretical coverage

 

dry

wet

 

Coverage

60 µm

100 µm

10.0 m2/l

 

125 µm

210 µm

4.8 m2/l

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

Thinner                      
1031

Mixing ratio                    

Base 4 parts by volume 008 7520

Hardener 1 part by volume

008 5600 or 008 5605 (fast)

Application method        

By airless spray or brush.

Pot-life (+23°C)              6 hours with Hardener 008 5600
                                3 hours with Hardener 008 5605

DFT 80 µm

0 ºC

+ 5 ºC

+ 10 ºC

+ 23 ºC

+ 35 ºC

 

Dust dry, after

with Hardener 008 5600

4 h

2 h

1 h

½ h

15 min

 

with Hardener 008 5605

3 h

1½ h

¾ h

½ h

12 min

Drying
times

Touch dry, after

with Hardener 008 5600

22 h

12 h

6 h

2½ h

1 ½ h

 

with Hardener 008 5605

12 h

6 h

4 h

2 h

1 h

 

Recoatable with epoxy paints, min. after

with Hardener 008 5600

30 h

20 h

6 h

2 h

1 h

 

with Hardener 008 5605

18 h

12 h

4 h

1½ h

¾ h

 

Recoatable with polyurethane paints, min. after

with Hardener 008 5600

2 d

32 h

18 h

8 h

5 h

 

with Hardener 008 5605

1 ½ d

18 h

12 h

5 h

3 h

 Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.

 Solids volume               
60 ± 2 % volume (ISO 3233)
78 ± 2 % weight
Density                     
1.5 kg / l (mixed)

APPLICATION DETAILS Finncoatings®color on the highest level

Application conditions    
All surfaces must be clean and dry and free from contamination.The temperature of the substrate should be minimum 0 °C and at least 3 ° C above the dew point of the air.The product should not be applied at temperatures below 0 °C where there is a possibility of ice formation on the substrate. The temperature of paint itself should be above + 15 °C for proper application. Good ventilation is required in confined areas during application and drying.Note! There is a natural tendency of epoxy
coatings to chalk and discolor on exterior exposure

Preparation

Primed surfaces         Finncoatings®color on the highest level    
Oil, grease, salt and dirt are removed from the surface by appropriate means. Repair any damage to the primer coat. Note the overcoating time of primer. (ISO 12944-4)

Priming                                
TEMAZINC 77, TEMAZINC 88, TEMAZINC 99, TEMACOAT GPL-S PRIMER, TEMASIL 90 and TEMABOND.

Finishing                      
TEMACOAT GPL, TEMACOAT GS 50, TEMACOAT RM 40,TEMADUR 20,TEMADUR 50, TEMADUR 90,TEMADUR HB 50, TEMADUR HB 80, TEMATHANE 50 and TEMATHANE 90.

Painting        Finncoatings®color on the highest level                
By airless spray or brush. At spray application the paint should be thinned 0 - 10 %. Airless spray nozzle tip 0.015" - 0.021" and nozzle pressure 120 - 180 bar. Spray angle shall be chosen according to the shape of the object. At brush application the paint should be thinned according to the circumstancies.

Mixing of components     
First stir base and hardener separately. The correct proportions of base and hardener must be mixed thoroughly before use. Use Temaspeed Squirrel Mixer for mixing.

Cleaning of tools           
Thinner 1031.

EU VOC 2004/42/EC-limit value  The Volatile Organic Compounds amount is 340 g/litre of paint. VOC content of paint mixture (thinned 10 % by volume) is 400 g/l.

 

 


Copyright 2011 - 2016. Joomla Templates 1.7. | Copyright © Finncoatings & MK Farbenwelt | All Rights Reserved