Finncoatings® Color on the highest level

 

Temazinc EE

 

DESCRIPTION     

 

A one component zinc dust paint.

 

PRODUCT FEATURES       Finncoatings®color on the highest level 

 

Used as a primer for steel surfaces exposed to weathering and chemical stress. Ideal as a touch-up primer on damaged areas of zinc primed steel. Can be used without a topcoat on surfaces exposed to climatic stress.

 

RECOMMENDED USES       Finncoatings®color on the highest level 

 

Steel surfaces.

 

TECHNICAL DATA   Finncoatings®color on the highest level

 

Features     

 

Offers cathodic protection for steel.

 

Colour Range        Finncoatings®color on the highest level

 

Grey.

 

Gloss groups       Finncoatings®color on the highest level 

 

Matt

 

Coverage   Finncoatings®color on the highest level

 

Recommended film thicknesses

Theoretical coverage

dry

wet

 

30 µm

55 µm

18.7 m2/l

50 µm

90 µm

11.2 m2/l

 

Practical coverage depends on the application method, painting conditions and the shape and roughness of the surface to be coated.

 

Thinner     

 

1006

 

Application method        Finncoatings®color on the highest level

 

By dipping, spray or brush.

 

Drying times   Finncoatings®color on the highest level

 

DFT 40 µm

+ 10 ºC

+ 23 ºC

+ 35 ºC

Dust dry, after

30 min

15 min

15 min

Touch dry, after

3 h

1,5 h

1 h

Recoatable, after

12 h

6 h

3 h

 

Drying and recoating times are related to the film thickness, temperature, the relative humidity of the air and ventilation.

 

Solids volume      Finncoatings®color on the highest level  

 

56 ± 2 % volume
Density     2.7 kg / l

 


APPLICATION DETAILS

 

Application conditions     

 

All surfaces must be dry. The temperature of the ambient air or surface should not fall below + 5 ºC during application and drying. Relative humidity should not exceed 80 %. The surface temperature of the steel should remain at least 3 ºC above the dew point.

 

Preparation        Finncoatings®color on the highest level

 

Oil, grease, salts and dirt are removed by appropriate means. (ISO 12944-4)

Steel surfaces

 

Blast clean to grade Sa2½. (ISO 8501-1)
Finishing       Finncoatings®color on the highest level 

 

TEMANYL MS PRIMER, TEMAPRIME EE and FONTECRYL 10.

 

Painting        Finncoatings®color on the highest level

 

By dipping, spray or brush. Mix the paint thoroughly before use. Depending on the application method the paint should be thinned 0 - 10 % by volume. Airless spray nozzle tip 0.015" - 0.021" and nozzle pressure 120 - 180 bar. Spray angle shall be chosen according to the shape of the object.

 

Cleaning of tools     

 

Thinner 1006.

 

EU VOC 2004/42/EC-limit value     The Volatile Organic Compounds amount is 385 g/litre of paint.VOC content of the paint (thinned 10 % by volume) is 417 g/l.
For industrial and professional use only.

Finncoatings® Color on the highest level

 

Finncoatings  
Heidelberger Straße 8
74858 Aglasterhausen-Germany

 

 

Tel. + 49 (0)6262 917095
Fax  + 49 (0)6262 917791

www.finncoatings.com
Mail. Diese E-Mail-Adresse ist vor Spambots geschützt! Zur Anzeige muss JavaScript eingeschaltet sein!